{"title":"Brey Krause","description":"\u003cp\u003eBrey-Krause is a US-based manufacturer established in 1909, specializing in high-quality stainless steel and brass products, with a 68,000 sq ft facility in Nazareth, PA. They operate in two main sectors: commercial, ADA-compliant washroom accessories and high-performance automotive aftermarket parts (harness bars, seat mounts, camera mounts) for brands like Porsche and BMW. \u003c\/p\u003e","products":[{"product_id":"brey-krause-seat-side-mount-adapter-w-factory-slider-bmw-f8x-e9x-s55-s65","title":"Brey Krause Seat Side Mount Adapter w\/ Factory Slider - BMW F8x\/E9x","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause Seat Mount installs directly to the factory manual or power sliders on the driver or passenger side of BMW F8x \u0026amp; E9x 3-Series Sedans and Coupes (including the M3). The R-9280 works with wider width side-mounting seats with a measurement at the side-mounting point of 430-460mm. The R-9281 with medium width side-mounting seats with a measurement at the side-mounting point of 390-429mm. The lightweight bracket is designed to bolt directly to the floor of the car using the factory BMW seat-mounting hardware, retaining the seats fore-aft adjustability. The innovative design utilizes factory BMW switches (power sliders only) for a complete OE installation. The factory seat-belt mounting point is retained to install the factory, 3-point belt hardware, allowing the belts to stay properly located regardless of the seating position. Easily integrates with the Brey Krause R-9259 Sub Strap Mount or R-2295 Fire Extinguisher Mount (both sold separately).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMedium Width (390-429mm seats) fits many popular seats, including (but not limited to):\u003cbr\u003e• Sparco Ergo (Medium)\u003cbr\u003e• Sparco Circuit 2\u003cbr\u003e• Sparco Evo II\u003cbr\u003e• Sparco Sprint\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLarge Width (440-427mm seats) fits many popular seats, including (but not limited to):\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Recaro Profi XL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Recaro Pole Position\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Recaro Pro Racer Hans XL SPA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Recaro Pro Racer Hans XL\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Sparco Ergo (Large)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Sparco Evo II US\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Sparco Evo III\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Sparco Pro 2000 II\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eE9X: \u003c\/b\u003eE92, E91, E92\u003cbr\u003e\u003cb\u003eF8X: \u003c\/b\u003eF80 M3, F84 M4, F87 M2\u003cbr\u003e\u003cb\u003eF3X: \u003c\/b\u003eF30, F31, F32\u003cbr\u003e\u003cb\u003eE82:\u003c\/b\u003e 1 series, M1\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Medium(R-9281)","offer_id":52673779827004,"sku":"R-9281","price":236.24,"currency_code":"USD","in_stock":true},{"title":"Large(R-9280)","offer_id":52673782645052,"sku":"R-9280","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/r-9280-web.webp?v=1769199558"},{"product_id":"brey-krause-bottom-mounted-seat-adapters-bmw-f8x-e9x-f3x","title":"Brey Krause Bottom Mounted Seat Adapters - BMW F8x\/E9x\/F3x","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause R-9292 Seat Mount is an innovative solution that attaches bottom mounting Sparco, Cobra or Recaro seats to the OE-factory, power slider mechanisms on BMW E9X, F3X, E82, \u0026amp; F8X Series cars. The mount maintains the factory power adjustment for front\/back settings (requires BMW E30 window switches - not included, but easily sourced).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eE9X: \u003c\/b\u003eE92, E91, E92\u003cbr\u003e\u003cb\u003eF8X: \u003c\/b\u003eF80 M3, F84 M4, F87 M2\u003cbr\u003e\u003cb\u003eF3X: \u003c\/b\u003eF30, F31, F32\u003cbr\u003e\u003cb\u003eE82:\u003c\/b\u003e 1 series, M1\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":52673784709436,"sku":"R-9292","price":236.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9239-2-web_647d79e2-0b64-4beb-8d7c-d1cd62ba5b6c.webp?v=1769200082"},{"product_id":"brey-krause-cobra-nogaro-seat-mounts-for-oem-sliders-bmw-f8x-e9x","title":"Brey Krause Cobra Nogaro Seat Mounts for OEM Sliders - BMW F8x\/E9x","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause R-9286 Seat Mount kit is an innovative solution that mounts the Cobra Nagaro racing seat directly to BMW OEM power or manual seat sliding mechanisms. Includes both the driver and passenger mounts for a complete install. By using this side-mount, the racing seat can be bolted directly to the existing passenger-side seat-slider hardware on all BMW F8x \u0026amp; E9x 3-Series Sedans and Coupes (including the M3). Utilizing the factory sliders not only allows for a significantly greater adjustment range, but they are designed and tested to have the belts mounted above them, allowing the belts to stay properly located regardless of seating position.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Brey Krause adapters utilize the factory 3-point belt system, or Clip-in Lap Belt mounts are sold separately for mounting racing harnesses. They also are designed to use the factory BMW switch (when used with power sliders), creating a unique OE look. Easily integrates with the Brey Krause R-9258 Sub Strap Mount (sold separately).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eE9X: \u003c\/b\u003eE92, E91, E92\u003cbr\u003e\u003cb\u003eF8X: \u003c\/b\u003eF80 M3, F84 M4, F87 M2\u003cbr\u003e\u003cb\u003eF3X: \u003c\/b\u003eF30, F31, F32\u003cbr\u003e\u003cb\u003eE82:\u003c\/b\u003e 1 series, M1\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Medium(R-9281)","offer_id":52673786085692,"sku":null,"price":236.24,"currency_code":"USD","in_stock":true},{"title":"Large(R-9280)","offer_id":52673786118460,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9286-2.jpg?v=1769200213"},{"product_id":"brey-krause-seat-side-mount-adapter-direct-to-floor-bmw-f8x-e9x","title":"Brey Krause Seat Side Mount Adapter Direct to Floor - BMW F8x\/E9x","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause Seat Mount is a unique direct-to-floor mount that fits the driver or passenger side of BMW E9x 3-Series Sedans and Coupes (including the M3). The R-9260 works with wider width side-mounting seats with a measurement at the side-mounting point of 435-460mm. The lightweight bracket is designed to bolt directly to the floor of the car using the factory BMW seat-mounting hardware, eliminating the heavy sliding-mechanism, and providing the lowest possible seat mounting position. Snap-in hooks are built into the mounts for easy installation of multi-point harnesses, while a mounting point is also included to install the factory, 3-point belt hardware. Easily integrates with the Brey Krause R-9259 Sub Strap Mount or R-2295 Fire Extinguisher Mount (both sold separately).\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits all BMW E9x 3-Series models, including M3.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBolts directly to floor of the car - No other hardware needed\u003c\/li\u003e\n\u003cli\u003eTested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/li\u003e\n\u003cli\u003eRear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength.\u003c\/li\u003e\n\u003cli\u003eMaterial: Type 304, stainless steel\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoated in durable black wrinkle-finish\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe R-9262 fits seats between 385mm - 409mm wide at the side mount mounting point.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThe R-9261 fits seats between 410mm - 434mm wide at the side mount mounting point.\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe R-9260 fits seats between 435mm - 460mm wide at the side mount mounting point.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cb\u003eE9X: \u003c\/b\u003eE92, E91, E92\u003cbr\u003e\u003cb\u003eF8X: \u003c\/b\u003eF80 M3, F84 M4, F87 M2\u003cbr\u003e\u003cb\u003eF3X: \u003c\/b\u003eF30, F31, F32\u003cbr\u003e\u003cb\u003eE82:\u003c\/b\u003e 1 series, M1\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Small(R-9262)","offer_id":52673789985084,"sku":null,"price":236.24,"currency_code":"USD","in_stock":true},{"title":"Medium(R-9261)","offer_id":52673786839356,"sku":"R-9281","price":236.24,"currency_code":"USD","in_stock":true},{"title":"Large(R-9260)","offer_id":52673786872124,"sku":"R-9280","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/r-9280-web.webp?v=1769199558"},{"product_id":"brey-krause-lap-belt-mounts-bmw-f8x-e9x","title":"Brey Krause Lap Belt Mounts - BMW F8x\/E9x","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause Model R-9289 Lap Belt Mount fits the driver-side of all BMW F8x \u0026amp; E9x models (including the M3) and allows for the quick and easy mounting of snap-in lap belts. Will not interfere with factory seat belt. Includes 2 brackets for both the door and tunnel sides of the seat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cb\u003eE9X: \u003c\/b\u003eE92, E91, E92\u003cbr\u003e\u003cb\u003eF8X: \u003c\/b\u003eF80 M3, F84 M4, F87 M2\u003cbr\u003e\u003cb\u003eF3X: \u003c\/b\u003eF30, F31, F32\u003cbr\u003e\u003cb\u003eE82:\u003c\/b\u003e 1 series, M1\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Driver","offer_id":52673793982780,"sku":"R-9289","price":104.96,"currency_code":"USD","in_stock":true},{"title":"Passenger","offer_id":52673794048316,"sku":"R-9288","price":104.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/r-9289-driver-web.webp?v=1769201120"},{"product_id":"brey-krause-sub-strap-mount-for-bk-side-mount-systems-bmw-f8x-e9x","title":"Brey Krause Sub Strap Mount for BK Side Mount Systems - BMW F8x\/E9x","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause Model Anti-Sub Strap Mount is designed to mount directly to Brey Krause's line of R-925X BMW E36 \u0026amp; E46 Seat Adapter Brackets and the R-9052 Porsche Side-Mount Bracket. The stainless steel bar is threaded on both ends to allow for length adjustment between various seat sizes, while still keeping the sub-strap guide centered. Bar can be used with Driver or Passenger-side mounts, and can be mounted in two possible positions on the R-925X brackets to allow for proper positioning. \u003c\/span\u003e\u003cspan\u003eNote: \u003c\/span\u003e\u003cspan\u003eFits Narrow and Medium R-925x brackets only (seats up to 426mm wide).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSmall For seats up to 426mm wide at the front mount points. For seats over 425mm use the Large sub strap mount.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cb\u003eE9X: \u003c\/b\u003eE92, E91, E92\u003cbr\u003e\u003cb\u003eF8X: \u003c\/b\u003eF80 M3, F84 M4, F87 M2\u003cbr\u003e\u003cb\u003eF3X: \u003c\/b\u003eF30, F31, F32\u003cbr\u003e\u003cb\u003eE82:\u003c\/b\u003e 1 series, M1\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Small(R-9259)","offer_id":52673796211004,"sku":"R-9259","price":118.08,"currency_code":"USD","in_stock":true},{"title":"Large(R-9258)","offer_id":52673796243772,"sku":"R-9258","price":118.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/r-9259-web.webp?v=1769201400"},{"product_id":"brey-krause-harness-bar-bmw-e92","title":"Brey Krause Harness Bar - BMW E92","description":"\u003cp\u003e\u003cspan\u003eThe Brey Krause R-1203 Harness Bar fits all E92 BMW Coupes, including M3 models, and properly locates and supports racing shoulder harnesses relative to the driver. The easy to install bar does not require modification to the car, and attaches to existing seat belt mounts and seat-track hardware. The harness guides also prevent excessive shifting and fatigue of the driver during the high G-loads of cornering and braking. Fabricated from Type 304, stainless steel and then powdercoated in durable black wrinkle-finish. The Brey Krause BMW harness mount bars are easy to install and remove, use only factory existing holes and mounting points, and will not damage the car in any way. After initial installation, the bar can be removed and reattached in about 15 minutes. This design allows enough seat travel for even the tallest drivers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from Type 304, stainless steel\u003c\/li\u003e\n\u003cli\u003ePowdercoated in durable black wrinkle-finish\u003c\/li\u003e\n\u003cli\u003eWeight: 16 lbs\u003c\/li\u003e\n\u003cli\u003eFits all BMW E92 Coupes\u003c\/li\u003e\n\u003cli\u003eInstallation: Bar attaches to seat belt mounts \u0026amp; seat track hardware.\u003c\/li\u003e\n\u003cli\u003eBar is designed to allow enough seat travel for tall drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan id=\"product_description\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":52673800700220,"sku":"R-1203","price":912.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/r-1203-web.webp?v=1769201934"},{"product_id":"brey-krause-harness-bar-bmw-e90","title":"Brey Krause Harness Bar - BMW E90","description":"\u003ctable width=\"100%\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\" class=\"colors_descriptionbox\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"100%\" valign=\"top\"\u003e\n\u003ctable width=\"100%\" cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv id=\"ProductDetail_ProductDetails_div\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd width=\"1\" background=\"https:\/\/www.bkauto.com\/v\/vspfiles\/templates\/194\/images\/DBox_Border_Left.gif\" valign=\"middle\"\u003e\u003cimg src=\"https:\/\/www.bkauto.com\/v\/vspfiles\/templates\/194\/images\/clear1x1.gif\" width=\"1\" height=\"1\" alt=\"\"\u003e\u003c\/td\u003e\n\u003ctd width=\"100%\" valign=\"top\"\u003e\n\u003ctable width=\"100%\" cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv id=\"ProductDetail_ProductDetails_div\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003eThe BMW E90 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The BMW E90 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way.\u003c\/span\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eStrength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe Brey-Krause Harness Mount supported the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles. Tensile tests performed by an independent lab.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMaterial:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eType 304, stainless steel\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eFinish:\u003c\/span\u003e\u003cspan\u003e Powder coated\u003c\/span\u003e in durable black wrinkle-finish\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eWeight: \u003c\/span\u003e16 lbs\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eModels:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eBMW E90\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eInstallation:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eBar attaches to seat belt mounts \u0026amp; seat track hardware.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMiscellaneous: \u003c\/span\u003eBar is designed to allow enough seat travel for tall drivers.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan id=\"product_description\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":52673802633532,"sku":"R-1204","price":912.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/r-1203-web.webp?v=1769201934"},{"product_id":"brey-krause-r-9201-harness-mounting-hardware","title":"Brey Krause R-9201 Harness Mounting Hardware","description":"\u003cspan id=\"product_description\"\u003e\r\nSecure snap-in lap belts quickly to outside seat belt mounting point.\r\n\r\n\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e\t     Tig Welded, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:\u003c\/span\u003e   \t Satin finish stainless\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e   \t 6 oz.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e   \t BMW E-36, E-46 M3\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e   \tSecures snap-in lap belts to factory (outside) seat belt mounting points.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMiscellaneous:\u003c\/span\u003e   \tAllows user to remove and install belts in seconds. Will not interfere with factory seat belt. One pair will work for both seats.\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009177916,"sku":"R-9201","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9201-2_c454d848-21aa-4ff4-ab69-42a1a2f378c8.jpg?v=1784838382"},{"product_id":"brey-krause-r-1201-harness-mount-bar","title":"Brey Krause R-1201 Harness Mount Bar","description":"\u003cspan id=\"product_description\"\u003e\r\nThe E36 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe E36 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. \r\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eStrength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eMaterial:   \u003c\/span\u003eType 304, stainless steel. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eFinish:\u003c\/span\u003e    Powdercoated in durable black wrinkle-finish. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eWeight:   \u003c\/span\u003e16 Lbs. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eModels:\u003c\/span\u003e   '95 - '99 E36, fits M3 Coupe Chassis \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eInstallation:\u003c\/span\u003e   Bar is mounted to the rear side lap belt mounting points via brackets that are installed once and remain in the car. Support rods are attached to the ends of the main tube while the other end attaches to car at the front lap belt mounting points located at the door sills. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eMiscellaneous:\u003c\/span\u003e     Bar is designed to allow enough seat travel for tall drivers. After initial installation the bar can be removed and reattached in about 15 minutes. Includes provisions for Seat Back Brace.\u003cbr\u003e\u003cbr\u003e\u003cinline\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003eAccessories:\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e\n\u003cinline style=\"background-color: initial;\"\u003e\u003cinline\u003e\u003cinline\u003e\u003cb\u003eSeat Back Brace:\u003c\/b\u003e \u003c\/inline\u003e\u003c\/inline\u003e\u003c\/inline\u003eR-9019 \u0026amp; R-9020\u003c\/li\u003e\u003c\/ul\u003e\u003c\/inline\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009308988,"sku":"R-1201","price":674.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-1201-2_f1961b8e-b440-42cb-adb2-77736e179d67.jpg?v=1784838383"},{"product_id":"brey-krause-r-9228-driver-side-sub-strap-mount","title":"Brey Krause R-9228 Driver Side Sub Strap Mount","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMaterial:\u003c\/b\u003e Type 304 stainless steel\u003cbr\u003e\n\u003cb\u003eFinish: \u003c\/b\u003ebrushed stainless finish\u003cbr\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 2 lbs\u003cbr\u003e\n\u003cb\u003eModels:\u003c\/b\u003e E46, E85, E86, can be used with e46 sliders in the E36\u003cbr\u003e\u003cb style=\"background-color: initial; letter-spacing: 0px;\"\u003eInstallation:\u003c\/b\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e Provides mounting point for a sub strap when using OEM sliders with R-9220\/1\/2\/3 series side mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003cb\u003eMiscellaneous: \u003c\/b\u003eAttaches to the original BMW power or manual slider\r\nthat came with your car.\u003cbr\u003e\n\u003c!--[if !supportLineBreakNewLine]--\u003e\u003cbr\u003e\n\u003c!--[endif]--\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cbr\u003e\r\nFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9228 (driver) and R-9229 (passenger) are\r\ndesigned to work with the R-9220\/1\/2\/3 side mounts. They bolt directly to the\r\nOE slider that BMW used BMW used in the E46\/E85\/E86.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9228\/9 properly located the belt to the seat for\r\noptimal safety. Because it moves with the slider, it stay properly located and\r\nthe same length, regardless of seat position.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-Unlike aftermarket sliders, the BMW sliders were built to\r\nhave belts mounted above them—that’s how the factory 3 point attaches to the\r\ncar.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009407292,"sku":"R-9228","price":84.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9228-2_59299e17-fa83-460e-9a70-c97c7989c287.jpg?v=1784838384"},{"product_id":"brey-krause-r-9229-passenger-side-sub-strap-mount","title":"Brey Krause R-9229 Passenger Side Sub Strap Mount","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMaterial:\u003c\/b\u003e Type 304 stainless steel\u003cbr\u003e\n\u003cb\u003eFinish: \u003c\/b\u003ebrushed stainless finish\u003cbr\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 2 lbs\u003cbr\u003e\n\u003cb\u003eModels:\u003c\/b\u003e E46, E85, E86, can be used with e46 sliders in the E36\u003cbr\u003e\u003cb style=\"background-color: initial; letter-spacing: 0px;\"\u003eInstallation:\u003c\/b\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e Provides mounting point for a sub strap when using OEM sliders with R-9220\/1\/2\/3 series side mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003cb\u003eMiscellaneous: \u003c\/b\u003eAttaches to the original BMW power or manual slider\r\nthat came with your car.\u003cbr\u003e\n\u003c!--[if !supportLineBreakNewLine]--\u003e\u003cbr\u003e\n\u003c!--[endif]--\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cbr\u003e\r\nFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9228 (driver) and R-9229 (passenger) are\r\ndesigned to work with the R-9220\/1\/2\/3 side mounts. They bolt directly to the\r\nOE slider that BMW used BMW used in the E46\/E85\/E86.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9228\/9 properly located the belt to the seat for\r\noptimal safety. Because it moves with the slider, it stay properly located and\r\nthe same length, regardless of seat position.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-Unlike aftermarket sliders, the BMW sliders were built to\r\nhave belts mounted above them—that’s how the factory 3 point attaches to the\r\ncar.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009538364,"sku":"R-9229","price":84.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9229-2_28824ce5-e9b3-4bcc-a20d-48893477fa79.jpg?v=1784838384"},{"product_id":"brey-krause-r-9225-clip-in-lap-belt-mounts-for-r-9220-1-2-3-side-mounts","title":"Brey Krause R-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Side Mounts","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMaterial:\u003c\/b\u003e Type 304 stainless steel\u003cbr\u003e\n\u003cb\u003eFinish: \u003c\/b\u003esemi gloss black, polished stainless\u003cbr\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 1 lb\u003cbr\u003e\n\u003cb\u003eModels:\u003c\/b\u003e E46, E85, E86, can be used with e46 sliders in the E36\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eInstallation:\u003c\/b\u003e \u003cbr\u003e\n\u003cb\u003eMiscellaneous: \u003c\/b\u003eAttaches to the original BMW manual slider that came\r\nwith your car.\u003cbr\u003e\n\u003c!--[if !supportLineBreakNewLine]--\u003e\u003cbr\u003e\n\u003c!--[endif]--\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cbr\u003e\r\nFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9225 creates clip in or bolt in lap belt mount\r\npoints on the stock driver and passenger sliders BMW used in the E46\/E85\/E86,\r\nfor a 4\/5\/6 point harness.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-By attaching the belt mounts above the sliders, they belts\r\nstay properly located and the correct length, regardless of seat position.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-Unlike aftermarket sliders, the OE BMW sliders are designed\r\nto have belts mounted above them—this is how the stock seats mount the belts\r\nfrom the factory.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9225 can be used on coupe, sedan, or wagon sliders.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9225 is designed to be used in combination with the\r\nR-9220\/1\/2\/3 seat mounts. If you are using the R-925X line of direct to floor\r\nseat mounts, lap belt mount points are built into the seat mounts—so this part\r\nis not necessary.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009603900,"sku":"R-9225","price":117.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9225-2.jpg?v=1784838385"},{"product_id":"brey-krause-r-1246-e46-rear-deck-shoulder-harness-mount","title":"Brey Krause R-1246 E46 Rear Deck Shoulder Harness Mount","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\" style=\"margin: 0in 0in 0pt; color: rgb(34, 34, 34); font-family: Arial, Helvetica, sans-serif; letter-spacing: normal; background-color: rgb(255, 255, 255);\"\u003e\u003cspan style=\"color: black;\"\u003e\u003cspan style=\"background-color: rgb(255, 255, 255); font-family: Helvetica; color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"font-family: Helvetica;\"\u003e\u003cspan style=\"background-color: rgb(242, 242, 242);\"\u003eThe R-1246 rear deck harness mount system is a new concept in harness mounting. The R-1246 extends the factory back seat shoulder harness mount points through the rear deck, which lets you clip shoulder harnesses for a 4\/5\/6 point harness in and out in seconds. The R-1246 can be used with the factory rear seat belts still installed, meaning this is a solution that doesn’t compromise the practicality of your backseat whatsoever.\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Helvetica;\"\u003e\u003cu\u003e\u003c\/u\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"background-color: rgb(255, 255, 255); font-family: Helvetica; color: rgb(0, 0, 0);\"\u003e\u003cspan style=\"font-family: Arial, Helvetica, sans-serif; color: black;\"\u003e\u003c\/span\u003e\u003cbr\u003eThe E46 harness mount has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255); font-family: Helvetica; color: rgb(0, 0, 0);\"\u003eThe E46 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"background-color: rgb(255, 255, 255); font-family: Helvetica; color: rgb(0, 0, 0);\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"background-color: rgb(255, 255, 255); font-family: Helvetica; color: rgb(0, 0, 0);\"\u003eThe R-1246 BMW E46 Rear Deck Shoulder Harness Mount is easy to install and remove, uses only existing holes and mounting points, and will not damage the car in any way.\u003c\/span\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp class=\"MsoNormal\" style=\"margin: 0in 0in 0pt; font-size: small; letter-spacing: normal; font-family: Arial, Helvetica, sans-serif; background-color: rgb(255, 255, 255); color: rgb(34, 34, 34);\"\u003e\u003cspan style=\"color: black;\"\u003e \u003cu\u003e\u003c\/u\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv align=\"left\" dir=\"ltr\"\u003e\n\u003cp class=\"MsoNormal\" style='margin: 0in 0in 0pt; font-family: \"Times New Roman\";'\u003e\u003cb\u003e\u003cspan style=\"font-family: Arial; background-size: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cbr\u003e\u003cspan style=\"font-size: 12px;\"\u003eNote: The R-1246 requires longer shoulder harness belt runs than our other \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003eharness mounting solutions. Only use the R-1246 in combination with \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003eharnesses where the harness manufacturer approves of running the belts 30-40\" \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003e(depending on seat position) from shoulders to the harness mount points. Not \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003erecommended for drivers with seats in extremely forward positions (close to \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003esteering wheel), as harnesses may not be long enough to reach.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style='margin: 0in 0in 0pt; font-family: \"Times New Roman\";'\u003e\u003cspan style=\"font-family: Arial;\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cbr\u003eNote: The R-1246 is not compatible with our seat back support. Do not use in \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003eapplications where a seat back support is required. If a seat back support \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003eis desired, the R-1202 (e46 harness bar) allows for the use of a seat back \u003c\/span\u003e\u003cspan style=\"background-size: initial; background-origin: initial; background-clip: initial;\"\u003esupport (R-9020).  \u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style='margin: 0in 0in 0pt; font-family: \"Times New Roman\";'\u003e\u003cspan style=\"font-family: Arial;\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 12px;\"\u003e\u003cbr\u003e(Most Racing Sanctions and Drivers Schools recommend\/or require using a seat back brace with FIA certified seats that are 11 year past their manufacture date. Seats made before 2009 it is 6 years past manufacture date)\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eMaterial:\u003c\/span\u003e 304 Stainless Steel\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eFinish:\u003c\/span\u003e    Wrinkle Black Powder Coat \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; \"\u003eWeight: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eModels:\u003c\/span\u003e   BMW E46 M3\u003c\/div\u003e\n\u003cbr\u003e\u003cspan\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003eAccessories:\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e\u003c\/ul\u003e\u003c\/span\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009767740,"sku":"R-1246","price":382.16,"currency_code":"USD","in_stock":true}]},{"product_id":"brey-krause-r-1202-bmw-e46-shoulder-harness-mount-bar","title":"Brey Krause R-1202 BMW E46 Shoulder Harness Mount Bar","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-family: Arial; background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eThis product has been redesigned as of September 2018. The product\r\npictured may appear different than what you have purchased. New product pictures coming soon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003eThe E46 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. \u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe E46 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe R-1202 BMW E46 Shoulder Harness Mount Bar is easy to install and remove, uses only existing holes and mounting points, and will not damage the car in any way. \r\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe Shoulder Harness Mount Bar fits all BMW E46 coupes. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eMaterial:\u003c\/span\u003e 304 Stainless Steel\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eFinish:\u003c\/span\u003e    Wrinkle Black Powder Coat \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold; \"\u003eWeight: \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eModels:\u003c\/span\u003e   BMW E46\r\n\r\nFinished in a wrinkle black powder coat. Includes provisions for Seat Back Brace.\u003c\/div\u003e\n\u003cbr\u003e\u003cinline\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003eAccessories:\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e\n\u003cinline style=\"background-color: initial;\"\u003e\u003cb\u003eSeat Back Brace:\u003c\/b\u003e \u003c\/inline\u003eR-9019 \u0026amp; R-9020\u003c\/li\u003e\u003c\/ul\u003e\u003c\/inline\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855009898812,"sku":"R-1202","price":983.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-1202-2.jpg?v=1784838386"},{"product_id":"brey-krause-r-9232-washer-tank-relocation-bracket","title":"Brey Krause R-9232 Washer Tank Relocation Bracket","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003cbr\u003eMaterial: \u003c\/span\u003e 304 series stainless steel steel tubing\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish: \u003c\/span\u003e   \tPowder-coated black\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight: \u003c\/span\u003e\u003cb\u003e \u003c\/b\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels: \u003c\/span\u003eFor E46 BMW \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation: \u003c\/span\u003eThe Brey-Krause R-9232 washer tank relocation bracket has been designed to bolt into an MK60 DSC e46 (any body style) without modification, and provide a mounting point for an e36 washer tank, part number 61661387384 or 61668370834.\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMiscellaneous: \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cp class=\"MsoNormal\" style=\"MARGIN: 0in 0in 0pt\"\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855010160956,"sku":"R-9232","price":68.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9232-2.jpg?v=1784838389"},{"product_id":"brey-krause-r-1205-bmw-f30-f80-shoulder-harness-mount-bar","title":"Brey Krause R-1205 BMW F30\/F80 Shoulder Harness Mount Bar","description":"\u003cspan id=\"product_description\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan style=\"background-color: rgb(238, 238, 238);\"\u003e\u003cfont face=\"Arial, Verdana, Helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 13px;\"\u003eThe BMW F30\/F80 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The\u003c\/span\u003e\u003c\/font\u003e\u003c\/span\u003e\u003cspan style=\"background-color: rgb(238, 238, 238);\"\u003e\u003cfont face=\"Arial, Verdana, Helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 13px;\"\u003e BMW F30\/F80 \u003c\/span\u003e\u003c\/font\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003eharness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. \u003c\/span\u003e\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003eStrength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.   A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration. \u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003eThe Brey-Krause Harness Mount supported the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles.  Tensile tests performed by an independent lab. \u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003e\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e    Type 304, stainless steel\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eFinish:\u003c\/span\u003e     Powdercoated in durable black wrinkle-finish\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eWeight:     \u003c\/span\u003e16 lbs\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e     BMW F30\/F80\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e    Bar attaches to seat belt mounts \u0026amp; seat track hardware.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMiscellaneous:   \u003c\/span\u003eBar is designed to allow enough seat travel for tall drivers.\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855010423100,"sku":"R-1205","price":976.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-1205-2_4e51101f-d8c3-49ad-83b0-be9ad240935a.jpg?v=1784838392"},{"product_id":"brey-krause-r-1287-bmw-f87-shoulder-harness-mount-bar","title":"Brey Krause R-1287 BMW F87 Shoulder Harness Mount Bar","description":"\u003cspan id=\"product_description\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan style=\"background-color: rgb(238, 238, 238);\"\u003e\u003cfont face=\"Arial, Verdana, Helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 13px;\"\u003eThe BMW F87 M2 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. The\u003c\/span\u003e\u003c\/font\u003e\u003c\/span\u003e\u003cspan style=\"background-color: rgb(238, 238, 238);\"\u003e\u003cfont face=\"Arial, Verdana, Helvetica, sans-serif\"\u003e\u003cspan style=\"font-size: 13px;\"\u003e BMW F87 \u003c\/span\u003e\u003c\/font\u003e\u003c\/span\u003e\u003cspan style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003eharness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. \u003c\/span\u003e\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003eStrength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.   A mount really can't be relied on unless it has been tested to support the loads required by the National Highway Traffic Safety Administration. \u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003eThe Brey-Krause Harness Mount supported the loads specified by the National Highway Traffic Safety Admin. DOT for upper torso restraints in all automobiles.  Tensile tests performed by an independent lab. \u003c\/div\u003e\n\u003cdiv style=\"font-family: Arial, Verdana, Helvetica, sans-serif; font-size: 13px; background-color: rgb(238, 238, 238);\"\u003e\n\u003cdiv\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e    Type 304, stainless steel\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eFinish:\u003c\/span\u003e     Powdercoated in durable black wrinkle-finish\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eWeight:     \u003c\/span\u003e16 lbs\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e     BMW F87 M2, F82\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e    Bar attaches to seat belt mounts \u0026amp; seat track hardware.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMiscellaneous:   \u003c\/span\u003eBar is designed to allow enough seat travel for tall drivers.\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855010783548,"sku":"R-1287","price":976.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-1287-2_6c9fe231-c131-4e9c-9a05-307f7ea051ef.jpg?v=1784838393"},{"product_id":"brey-krause-r-1305-harness-mount-bar","title":"Brey Krause R-1305 Harness Mount Bar","description":"\u003cspan id=\"product_description\"\u003e\r\nThe Mini Cooper harness mount bar is an entirely new design. By making extensive use of water-jet machined sections and unique geometry, the R-1305 is our strongest and lightest harness bar of this configuration. It is also the only harness mount currently available for the Mini Cooper. \r\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe R-1305 is a bolt-in part that requires no drilling, cutting or fabrication. It can be easily removed to allow use of the rear seat area for daily driving. The lower seat cushion can remain while the bar is installed to satisfy sanctioning bodies for autocross. \r\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe R-1305 been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eMaterial:\u003c\/span\u003e    Type 304, stainless steel. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eFinish:\u003c\/span\u003e     Powdercoated in durable black wrinkle-finish. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eWeight:     \u003c\/span\u003e16.5 lbs. \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eModels:\u003c\/span\u003e     Mini Cooper, Mini Cooper S 2002-2006 \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eInstallation:\u003c\/span\u003e     Bar attaches to front and rear lap belt mounting points. It can be removed for access to the rear seat (floor brackets remain in place). \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold; \"\u003eMiscellaneous:     \u003c\/span\u003eBar limits seat travel to the rear approximately 1 inch. Includes provisions for Seat Back Brace.\u003c\/div\u003e\n\u003cbr\u003e\u003cinline\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003eAccessories:\u003c\/b\u003e\u003cbr\u003e\u003cb style=\"font-size: 20px;\"\u003e\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e\n\u003cinline style=\"background-color: initial;\"\u003e\u003cb\u003eSeat Back Brace:\u003c\/b\u003e \u003c\/inline\u003eR-9019 \u0026amp; R-9020\u003c\/li\u003e\u003c\/ul\u003e\u003c\/inline\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855011078460,"sku":"R-1305","price":821.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-1305-2_5bbab7a1-42cf-4a56-985f-957bd197bb4c.jpg?v=1784838398"},{"product_id":"brey-krause-r-9270-race-seat-mount","title":"Brey Krause R-9270 Race Seat Mount","description":"\u003cspan id=\"product_description\"\u003e\r\nThese brackets bolt a Recaro Pole Position one-piece racing seat to factory Mini sliders with no drilling or fabrication. The seat can be moved forward and backward just like factory seats.  They are manufactured from 11-gauge stainless steel and reinforced with gusseting.\r\n\r\nNOTE: Use of this seat will eliminate the factory seat airbags!\r\n\r\n\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMaterial: \u003c\/span\u003e \t  Type 304 stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish: \u003c\/span\u003e \tPowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e  \t 4 lbs. \r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e  \t  Mini Cooper, Mini Cooper S 2002-2006\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation: \u003c\/span\u003e \tBolts a Recaro Pole Position seat to factory Mini seat sliders.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMiscellaneous:\u003c\/span\u003e  \tSeat sold separately.\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855011209532,"sku":"R-9270","price":169.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9270-2.jpg?v=1784838399"},{"product_id":"brey-krause-r-9272-race-seat-mount","title":"Brey Krause R-9272 Race Seat Mount","description":"\u003cspan id=\"product_description\"\u003e\r\nThese brackets bolt a Sparco Evo one-piece racing seat to factory Mini sliders with no drilling or fabrication.  The seat can be moved forward and backward just like the factory seats.  They are manufactured from 11-gauge stainless steel and reinforced with gusseting.\r\n\r\n\u003cbr\u003eNOTE: Use of this seat will eliminate the factory seat.\r\n\r\n\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e  \t   Type 304, stainless steel.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:  \t\u003c\/span\u003ePowder-coated in tuxedo black\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e  \t4 lbs.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:  \t\u003c\/span\u003e  Mini Cooper, Mini Cooper S 2002-2006\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e  \tBolts a Sparco Evo seat to factory Mini seat sliders.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMiscellaneous:\u003c\/span\u003e  \tSeat sold separately\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855011995964,"sku":"R-9272","price":169.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9272-2_49178ef7-c19f-46e6-bb80-e0a7ad2f6a45.jpg?v=1784838399"},{"product_id":"brey-krause-r-9273-race-seat-mount","title":"Brey Krause R-9273 Race Seat Mount","description":"\u003cspan id=\"product_description\"\u003e\r\nThese brackets bolt a Sparco Evo 2 US one-piece racing seat to factory Mini sliders with no drilling or fabrication.  The seat can be moved forward and backward just like the factory seats.  They are manufactured from 11-gauge stainless steel and reinforced with gusseting.\u003cbr\u003eNOTE: Use of this seat will eliminate the factory seat airbags!\r\n\r\n\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  Type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:\u003c\/span\u003e   \tPowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e   \t4 lbs.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:   \t\u003c\/span\u003e Mini Cooper, Mini Cooper S 2002-2006\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:   \t\u003c\/span\u003eBolts a Sparco Evo 2 US seat to factory Mini seat sliders.\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855012487484,"sku":"R-9273","price":169.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9273-2_742c0d25-d831-4140-aebb-9afa08c27e8f.jpg?v=1784838400"},{"product_id":"brey-krause-r-9240-driver-seats-between-440mm-to-427mm-wide-at-mount-point","title":"Brey Krause R-9240 Driver Seats Between 440mm to 427mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 440mm and 427mm to BMW E36 floor\r\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-924X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9240 fits seats between 427mm and 440mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003eRecaro Profi XL\u003cbr\u003eRecaro Pole Position\u003cbr\u003eRecaro Pro Racer Hans XL SPA\u003cbr\u003eRecaro Pro Racer Hans XL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e36 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-924X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-924X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-924X Series Side Mounts\u003cbr\u003eR-2295\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFire Extinguisher Mount for R-924X Series Side Mounts\u003c\/span\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855012716860,"sku":"R-9240","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9240-2_bbfaa109-b798-4e3f-af7b-eee288c2622d.jpg?v=1784838401"},{"product_id":"brey-krause-r-9241-passenger-seats-between-440mm-to-427mm-wide-at-mount-point","title":"Brey Krause R-9241 Passenger Seats Between 440mm to 427mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 440mm and 427mm to BMW E36 floor\r\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-924X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9241 fits seats between 440mm and 427mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003eRecaro Profi XL\u003cbr\u003eRecaro Pole Position\u003cbr\u003eRecaro Pro Racer Hans XL SPA\u003cbr\u003eRecaro Pro Racer Hans XL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e36 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-924X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-924X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-924X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-924X Series Side Mounts\r\n\t\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855013044540,"sku":"R-9241","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9241-2.jpg?v=1784838402"},{"product_id":"brey-krause-r-9242-driver-seats-between-426mm-to-410mm-wide-at-mount-point","title":"Brey Krause R-9242 Driver Seats Between 426mm to 410mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 426mm and 410mm to BMW E36 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-924X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9242 fits seats between 426mm and 410mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e36 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-924X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-924X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-924X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-924X Series Side Mounts \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855013404988,"sku":"R-9242","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9242-2_db813a72-9c44-4718-922b-c9b067f8343a.jpg?v=1784838403"},{"product_id":"brey-krause-r-9243-passenger-seats-between-426mm-to-410mm-wide-at-mount-point","title":"Brey Krause R-9243 Passenger Seats Between 426mm to 410mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 426mm and 410mm to BMW E36 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-924X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9243 fits seats between 426mm and 410mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e36 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-924X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-924X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-924X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-924X Series Side Mounts \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855013765436,"sku":"R-9243","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9243-2_e881068b-f956-4f06-88d4-a09ad4c8cac6.jpg?v=1784838404"},{"product_id":"brey-krause-r-9245-passenger-seats-between-409mm-to-395mm-wide-at-mount-point","title":"Brey Krause R-9245 Passenger Seats Between 409mm to 395mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 410mm and 395mm to BMW E36 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-924X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9245 fits seats between 426mm and 410mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e36 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-924X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-924X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-924X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-924X Series Side Mounts \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855014027580,"sku":"R-9245","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9245-2_a4ec4618-46e5-4fb9-ab5f-3a2bdb723706.jpg?v=1784838405"},{"product_id":"brey-krause-r-9244-driver-seats-between-409mm-to-395mm-wide-at-mount-point","title":"Brey Krause R-9244 Driver Seats Between 409mm to 395mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 410mm and 395mm to BMW E36 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-924X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9244 fits seats between 426mm and 410mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-924X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e36 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-924X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-924X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-924X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-924X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-924X Series Side Mounts \u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855014289724,"sku":"R-9244","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9244-2.jpg?v=1784838406"},{"product_id":"brey-krause-r-9250-driver-seats-between-440mm-to-427mm-wide-at-mount-point","title":"Brey Krause R-9250 Driver Seats Between 440mm to 427mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 440mm and 427mm to BMW E46 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9250 fits seats between 427mm and 440mm wide at the side mount mounting point.  This includes, but is not limited to:\u003cbr\u003eRecaro Profi XL\u003cbr\u003eRecaro Pro Racer Hans XL SPA\u003cbr\u003eRecaro Pro Racer Hans XL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for \u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855014617404,"sku":"R-9250","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9250-2_a9050107-0291-4219-b6c0-d0e6dbf8d7df.jpg?v=1784838408"},{"product_id":"brey-krause-r-9251-passenger-seats-between-440mm-to-427mm-wide-at-mount-point","title":"Brey Krause R-9251 Passenger Seats Between 440mm to 427mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 440mm and 427mm to BMW E46 passenger side floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003eThe R-9251 fits seats between 427mm and 440mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003eRecaro Profi XL\u003cbr\u003eRecaro Pro Racer Hans XL SPA\u003cbr\u003eRecaro Pro Racer Hans XL\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855014748476,"sku":"R-9251","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9251-2.jpg?v=1784838409"},{"product_id":"brey-krause-r-9252-driver-seats-between-426mm-to-410mm-wide-at-mount-point","title":"Brey Krause R-9252 Driver Seats Between 426mm to 410mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 426mm to 410mm to BMW E46 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9252 fits seats between 410mm and 426mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855014814012,"sku":"R-9252","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9252-2_abaf2180-fcea-4b39-a13c-3a3395059252.jpg?v=1784838410"},{"product_id":"brey-krause-r-9253-passenger-seats-between-426mm-to-410mm-wide-at-mount-point","title":"Brey Krause R-9253 Passenger Seats Between 426mm to 410mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 426mm to 410mm to BMW E46 passenger side floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9253 fits seats between 410mm and 426mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855014945084,"sku":"R-9253","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9253-2_0aa1ee56-d459-4cc0-9a6c-c187a8150c84.jpg?v=1784838411"},{"product_id":"brey-krause-r-9254-driver-seats-between-409mm-to-395mm-wide-at-mount-point","title":"Brey Krause R-9254 Driver Seats Between 409mm to 395mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 409mm to 395mm to BMW E46 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9254 fits seats between 395mm and 409mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003eRecaro Profi Spa\u003cbr\u003eRecaro Profi\u003cbr\u003eRecaro Pro Racer Hans\u003cbr\u003eCobra Monaco\u003cbr\u003eCobra Imola Pro\u003cbr\u003eCobra Suzuka Pro\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015076156,"sku":"R-9254","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9254-2_5bf1a44a-d734-4ccb-8ae6-75a3d5afd0a1.jpg?v=1784838413"},{"product_id":"brey-krause-r-9255-passenger-seats-between-409mm-to-395mm-wide-at-mount-point","title":"Brey Krause R-9255 Passenger Seats Between 409mm to 395mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 409mm to 395mm to BMW E46 passenger side floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9255 fits seats between 395mm and 409mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003eRecaro Profi Spa\u003cbr\u003eRecaro Profi\u003cbr\u003eRecaro Pro Racer Hans\u003cbr\u003eCobra Monaco\u003cbr\u003eCobra Imola Pro\u003cbr\u003eCobra Suzuka Pro\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\n\u003c\/font\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015207228,"sku":"R-9255","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9255-2_cacfb3db-0dc0-4b70-901f-b2480c661de8.jpg?v=1784838414"},{"product_id":"brey-krause-r-9257-passenger-seats-between-443mm-to-460mm-wide-at-mount-point","title":"Brey Krause R-9257 Passenger Seats Between 443mm to 460mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 443mm to 460mm to BMW E46 passenger side floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9257 fits seats between 443mm to 460mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 or R-9258 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\n\u003c\/font\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-9258 Sub Strap Mount for\u003cb\u003e wider\u003c\/b\u003e R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015338300,"sku":"R-9257","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9257-2_2578d98a-a940-42d4-b78e-69cabc7979b7.jpg?v=1784838415"},{"product_id":"brey-krause-r-9256-driver-seats-between-443mm-to-460mm-wide-at-mount-point","title":"Brey Krause R-9256 Driver Seats Between 443mm to 460mm wide at mount point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 6.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 443mm to 460mm to BMW E46 floor\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-925X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cbr\u003e\u003cbr\u003eThe R-9256 fits seats between 443mm to 460mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The R-925X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your e46 BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alternation to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the R-925X seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The R-925X seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all R-925X seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9259 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-9258 Sub Strap Mount for \u003cb\u003ewider\u003c\/b\u003e R-925X Series Side Mounts\u003cbr\u003eR-2295\u003cspan style=\"background-color: initial;\"\u003e Fire Extinguisher Mount for \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003eR-925X Series Side Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015436604,"sku":"R-9256","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9256-2_04ac2dd3-8bb0-4884-9b62-0ec59329e9aa.jpg?v=1784838415"},{"product_id":"brey-krause-r-9226-drivers-side-slider-release-mechanism","title":"Brey Krause R-9226 Drivers Side Slider Release Mechanism","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMaterial:\u003c\/b\u003e Type 304 stainless steel\u003cbr\u003e\n\u003cb\u003eFinish: \u003c\/b\u003esemi gloss black\u003cbr\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 1 lb\u003cbr\u003e\n\u003cb\u003eModels:\u003c\/b\u003e E46, E85, E86, can be used with e46 sliders in the E36\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eInstallation:\u003c\/b\u003e For use with OEM sliders with the R-9220\/1\/2\/3 series side mounts\u003cbr\u003e\n\u003cb\u003eMiscellaneous: \u003c\/b\u003eAttaches to the original BMW manual slider that came\r\nwith your car.\u003cbr\u003e\n\u003c!--[if !supportLineBreakNewLine]--\u003e\u003cbr\u003e\n\u003c!--[endif]--\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cbr\u003e\r\nFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9226 (driver) and R-9227 (passenger) are a\r\nreplacement slider release mechanism for the stock manual sliders BMW\r\nused in the E46\/E85\/E86. The stock slider release handle is built into the\r\nstock seat, so it can’t be reused when using the R-9220\/1\/2\/3 seat mounts.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9226\/7 are a semi gloss black, to match the stock\r\nsliders for an OE look.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- A rubberized release handle makes the handle\r\neasy to locate without needing to look down.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9226\/7 includes tension springs, to prevent\r\nannoying rattles.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015534908,"sku":"R-9226","price":84.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9226-2_0908b7b8-6d8f-4403-bd4e-6b06decb9244.jpg?v=1784838416"},{"product_id":"brey-krause-r-9227-passenger-side-slider-release-mechanism","title":"Brey Krause R-9227 Passenger Side Slider Release Mechanism","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMaterial:\u003c\/b\u003e Type 304 stainless steel\u003cbr\u003e\n\u003cb\u003eFinish: \u003c\/b\u003esemi gloss black\u003cbr\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 1 lb\u003cbr\u003e\n\u003cb\u003eModels:\u003c\/b\u003e E46, E85, E86, can be used with e46 sliders in the E36\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eInstallation:\u003c\/b\u003e For use with OEM sliders with the R-9220\/1\/2\/3 series side mounts\u003cbr\u003e\n\u003cb\u003eMiscellaneous: \u003c\/b\u003eAttaches to the original BMW manual slider that came\r\nwith your car.\u003cbr\u003e\n\u003c!--[if !supportLineBreakNewLine]--\u003e\u003cbr\u003e\n\u003c!--[endif]--\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cbr\u003e\r\nFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9226 (driver) and R-9227 (passenger) are a\r\nreplacement slider release mechanism for the stock manual sliders BMW\r\nused in the E46\/E85\/E86. The stock slider release handle is built into the\r\nstock seat, so it can’t be reused when using the R-9220\/1\/2\/3 seat mounts.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9226\/7 are a semi gloss black, to match the stock\r\nsliders for an OE look.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- A rubberized release handle makes the handle\r\neasy to locate without needing to look down.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- The R-9226\/7 includes tension springs, to prevent\r\nannoying rattles.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015665980,"sku":"R-9227","price":84.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9227-2_a5d6ece1-9d45-431e-be84-b45e93ddfc80.jpg?v=1784838417"},{"product_id":"brey-krause-r-9220-seat-mounts-for-oem-sliders-driver-430mm-460mm-wide","title":"Brey Krause R-9220 Seat Mounts for OEM Sliders (Driver 430mm-460mm wide)","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 3 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels: \u003c\/span\u003eE46, E85, E86, \u0026amp; can be used with E46 sliders in the E36. \u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eAttaches to the original BMW power or manual slider that came with your car.\u003cbr\u003e\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cb style=\"background-color: initial; letter-spacing: 0px;\"\u003eFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9220\/1\/2\/3 line of seat mounts is an innovative way\r\nto attach aftermarket seats to BMW OEM power or manual sliders. R-9220\/1\/2\/3\r\nside mounts bolt your aftermarket seats directly to the factory slider in the\r\nstock location with no additional adapters required. \u003cbr\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 series side mounts utilize the stock 3-point seat belt\r\nreceptacle mounting point to properly locate the stock seat belt. Additional\r\nharness lap-belts can be added for driver and passenger sides with the R-9225\r\nClip-in Lap Belt Mounts. If you’re using sedan\/wagon e46 sliders, both\r\nside lap belts can be bolted in without any additional parts.\u003cbr\u003e\n\u003cbr\u003e\r\n-Unlike aftermarket sliders, the factory BMW sliders are designed and tested to\r\nhave the belts mounted above them. This means the belts stay properly located\r\nto your seat, regardless of the seating position. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e-The OE Sliders have significantly more travel than\r\naftermarket sliders—more than double in some cases. This makes the back seat\r\nmuch more accessible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 mounts include provisions to properly locate a R-9228\r\n(driver) or R-9229 (passenger) sub strap mount and\/or R-2295 fire extinguisher\r\nmount, both of which move with the seats.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e- Wiring instructions for powered and non-power seats functions are provided\r\nwith the side mounts. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\r\n-The R-9280\/1\/2 line of seat mounts utilizes the factory BMW switch (for those\r\nusing it with power sliders), creating an OE look for the installation.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e-If manual BMW sliders are used, the R-9226 (driver) and\r\nR-9227 (passenger) slider release handles will replace the slider release built\r\ninto the stock seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015797052,"sku":"R-9220","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9220-2.jpg?v=1784838418"},{"product_id":"brey-krause-r-9221-seat-mounts-for-oem-sliders-passenger-430mm-460mm-wide","title":"Brey Krause R-9221 Seat Mounts for OEM Sliders (Passenger 430mm-460mm wide)","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 3 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels: \u003c\/span\u003eE46, E85, E86, \u0026amp; can be used with E46 sliders in the E36. \u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eAttaches to the original BMW power or manual slider that came with your car.\u003cbr\u003e\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cb style=\"background-color: initial; letter-spacing: 0px;\"\u003eFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9220\/1\/2\/3 line of seat mounts is an innovative way\r\nto attach aftermarket seats to BMW OEM power or manual sliders. R-9220\/1\/2\/3\r\nside mounts bolt your aftermarket seats directly to the factory slider in the\r\nstock location with no additional adapters required. \u003cbr\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 series side mounts utilize the stock 3-point seat belt\r\nreceptacle mounting point to properly locate the stock seat belt. Additional\r\nharness lap-belts can be added for driver and passenger sides with the R-9225\r\nClip-in Lap Belt Mounts. If you’re using sedan\/wagon e46 sliders, both\r\nside lap belts can be bolted in without any additional parts.\u003cbr\u003e\n\u003cbr\u003e\r\n-Unlike aftermarket sliders, the factory BMW sliders are designed and tested to\r\nhave the belts mounted above them. This means the belts stay properly located\r\nto your seat, regardless of the seating position. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e-The OE Sliders have significantly more travel than\r\naftermarket sliders—more than double in some cases. This makes the back seat\r\nmuch more accessible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 mounts include provisions to properly locate a R-9228\r\n(driver) or R-9229 (passenger) sub strap mount and\/or R-2295 fire extinguisher\r\nmount, both of which move with the seats.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e- Wiring instructions for powered and non-power seats functions are provided\r\nwith the side mounts. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\r\n-The R-9280\/1\/2 line of seat mounts utilizes the factory BMW switch (for those\r\nusing it with power sliders), creating an OE look for the installation.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: initial; letter-spacing: 0px;\"\u003e-If manual BMW sliders are used, the R-9226 (driver) and\r\nR-9227 (passenger) slider release handles will replace the slider release built\r\ninto the stock seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0.0001pt; letter-spacing: normal; background-image: initial; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan style=\"background-color: initial;\"\u003e \u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015862588,"sku":"R-9221","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9221-2_5dc4f1f9-42d6-41cd-99a3-2763315d7840.jpg?v=1784838419"},{"product_id":"brey-krause-r-9223-seat-mounts-for-oem-sliders-passenger-365mm-429mm-wide","title":"Brey Krause R-9223 Seat Mounts for OEM Sliders (passenger 365mm-429mm wide)","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 3 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels: \u003c\/span\u003eE46, E85, E86, \u0026amp; can be used with E46 sliders in the E36. \u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cspan style=\"color: rgb(34, 34, 34); letter-spacing: 0px; font-family: Arial;\"\u003eFor 365mm-429mm wide\u003c\/span\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e seats\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eAttaches to the original BMW power or manual slider that came with your car.\u003cbr\u003eThis is the recommended mount for Recaro SPG XLs and Pole positions. \u003cbr\u003e\u003cp style=\"margin: 0in 0in 0pt; letter-spacing: normal; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cb style=\"letter-spacing: 0px;\"\u003eFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9220\/1\/2\/3 line of seat mounts is an innovative way\r\nto attach aftermarket seats to BMW OEM power or manual sliders. R-9220\/1\/2\/3\r\nside mounts bolt your aftermarket seats directly to the factory slider in the\r\nstock location with no additional adapters required. \u003cbr\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 series side mounts utilize the stock 3-point seat belt\r\nreceptacle mounting point to properly locate the stock seat belt. Additional\r\nharness lap-belts can be added for driver and passenger sides with the R-9225\r\nClip-in Lap Belt Mounts. If you’re using sedan\/wagon e46 sliders, both\r\nside lap belts can be bolted in without any additional parts.\u003cbr\u003e\n\u003cbr\u003e\r\n-Unlike aftermarket sliders, the factory BMW sliders are designed and tested to\r\nhave the belts mounted above them. This means the belts stay properly located\r\nto your seat, regardless of the seating position. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e-The OE Sliders have significantly more travel than\r\naftermarket sliders—more than double in some cases. This makes the back seat\r\nmuch more accessible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 mounts include provisions to properly locate a R-9228\r\n(driver) or R-9229 (passenger) sub strap mount and\/or R-2295 fire extinguisher\r\nmount, both of which move with the seats.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e- Wiring instructions for powered and non-power seats functions are provided\r\nwith the side mounts. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\r\n-The R-9280\/1\/2 line of seat mounts utilizes the factory BMW switch (for those\r\nusing it with power sliders), creating an OE look for the installation.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e-If manual BMW sliders are used, the R-9226 (driver) and\r\nR-9227 (passenger) slider release handles will replace the slider release built\r\ninto the stock seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt; letter-spacing: normal; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855015993660,"sku":"R-9223","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9223-2.jpg?v=1784838420"},{"product_id":"brey-krause-r-9222-seat-mounts-for-oem-sliders-driver-365mm-429mm-wide","title":"Brey Krause R-9222 Seat Mounts for OEM Sliders (Driver 365mm-429mm wide)","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 3 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels: \u003c\/span\u003eE46, E85, E86, \u0026amp; can be used with E46 sliders in the E36. \u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eAttaches to the original BMW power or manual slider that came with your car. \u003cbr\u003eThis is the recommended mount for Recaro SPG XLs and Pole positions. \u003cbr\u003e\u003cp style=\"margin: 0in 0in 0pt; letter-spacing: normal; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cb style=\"letter-spacing: 0px;\"\u003eFeatures and Benefits:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e-The R-9220\/1\/2\/3 line of seat mounts is an innovative way\r\nto attach aftermarket seats to BMW OEM power or manual sliders. R-9220\/1\/2\/3\r\nside mounts bolt your aftermarket seats directly to the factory slider in the\r\nstock location with no additional adapters required. \u003cbr\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 series side mounts utilize the stock 3-point seat belt\r\nreceptacle mounting point to properly locate the stock seat belt. Additional\r\nharness lap-belts can be added for driver and passenger sides with the R-9225\r\nClip-in Lap Belt Mounts. If you’re using sedan\/wagon e46 sliders, both\r\nside lap belts can be bolted in without any additional parts.\u003cbr\u003e\n\u003cbr\u003e\r\n-Unlike aftermarket sliders, the factory BMW sliders are designed and tested to\r\nhave the belts mounted above them. This means the belts stay properly located\r\nto your seat, regardless of the seating position. \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e-The OE Sliders have significantly more travel than\r\naftermarket sliders—more than double in some cases. This makes the back seat\r\nmuch more accessible. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\n\u003cbr\u003e\r\n-The R-9220\/1\/2\/3 mounts include provisions to properly locate a R-9228\r\n(driver) or R-9229 (passenger) sub strap mount and\/or R-2295 fire extinguisher\r\nmount, both of which move with the seats.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e- Wiring instructions for powered and non-power seats functions are provided\r\nwith the side mounts. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\r\n-The R-9280\/1\/2 line of seat mounts utilizes the factory BMW switch (for those\r\nusing it with power sliders), creating an OE look for the installation.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"letter-spacing: 0px;\"\u003e-If manual BMW sliders are used, the R-9226 (driver) and\r\nR-9227 (passenger) slider release handles will replace the slider release built\r\ninto the stock seats.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt; letter-spacing: normal; background-color: rgb(238, 238, 238);\"\u003e\u003cinline style=\"background-color: rgb(255, 255, 255);\"\u003e\n\u003cbr\u003e\u003c\/inline\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9228 Sub Strap Mount for Drivers Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9229 Sub Strap Mount for Passenger Side R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-9220\/1\/2\/3 Side Mounts\u003cbr\u003eR-9225 Clip-In Lap Belt Mounts for R-9220\/1\/2\/3 Series Side Mounts\u003cbr\u003eR-9226 Driver Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts \u003cbr\u003eR-9227\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003ePassenger Side Slider Release Handle for Manual Sliders using the R-9220\/1\/2\/3 Series Mounts\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016091964,"sku":"R-9222","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9222-2_d0385dde-bdba-4e6c-8a8f-5e62aedabc87.jpg?v=1784838421"},{"product_id":"brey-krause-r-9246-bottom-mounted-seat-adapters-for-e46-z4","title":"Brey Krause R-9246 Bottom Mounted Seat Adapters for E46 \u0026 Z4","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003c\/p\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003eMaterial:\u003c\/span\u003e   \t    11 gauge, type 304, stainless steel\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:\u003c\/span\u003e   \tPowder-coated black\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e   \t 3 lbs.\r\n\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e   \t   Compatible with all Recaro, Sparco, \u0026amp; Cobra seats that use bottom mounting points.  \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e   \t Installs bottom mount seats to drivers side BMW E46 and Z4 stock powered and manual sliders. \u003cb\u003eThis product only has powered for and aft function\u003c\/b\u003e.\u003cb\u003e \u003c\/b\u003eTilt and height adjustment are not functional with aftermarket seats. See R-9247 for passenger side mounts.\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016190268,"sku":"R-9246","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9246-2_cf76802c-0587-4d96-ac6a-4fce320f8c0e.jpg?v=1784838421"},{"product_id":"brey-krause-r-9260-for-seats-between-435mm-and-460mm-at-the-mount-point","title":"Brey Krause R-9260 for Seats between 435mm and 460mm at the Mount Point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 4.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 435mm - 460mm to BMW E9X \u003c\/inline\u003e\n\u003cdiv\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-926X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cb\u003eSub Strap Mount Sold Separately.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe R-9260 fits seats between 435mm - 460mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003c\/inline\u003e\u003c\/strong\u003e\u003c\/inline\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e-The R-926X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your E9X BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required. \u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e-Due to not using a floor mount adaptor or sliders, the \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts allow your seat to be mounted lower than any other mounting solution we've seen. \u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts weight 4.5 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat. \u003cbr\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003cbr\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/R-9530 quick release mount or the stock 3 lb Amerex bottle mount.   \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-926X Series Side Mounts\u003c\/inline\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016288572,"sku":"R-9260","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9260-2_ad9e4931-23dc-4afc-8dec-5fdfbe803e11.jpg?v=1784838423"},{"product_id":"brey-krause-r-9261-for-seats-between-410mm-and-434mm-at-the-mount-point","title":"Brey Krause R-9261 for Seats between 410mm and 434mm at the Mount Point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 4.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 410mm - 434mm to BMW E9X and E82 Series floor\u003c\/inline\u003e\n\u003cdiv\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-926X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cb\u003eSub Strap Mount Sold Separately.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe R-9261 fits seats between 410mm - 434mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003c\/inline\u003e\u003c\/strong\u003e\u003c\/inline\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e-The R-926X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your E9X BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required. \u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e-Due to not using a floor mount adaptor or sliders, the \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts allow your seat to be mounted lower than any other mounting solution we've seen. \u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts weight 4.5 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat. \u003cbr\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003cbr\u003e-The \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003cbr\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all \u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/R-9530 quick release mount or the stock 3 lb Amerex bottle mount.   \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-926X Series Side Mounts\u003c\/inline\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016354108,"sku":"R-9261","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9261-2_98df0872-1850-4d9e-bbc5-9272f94cf731.jpg?v=1784838423"},{"product_id":"brey-krause-r-9262-for-seats-between-385mm-and-409mm-at-the-mount-point","title":"Brey Krause R-9262 for Seats between 385mm and 409mm at the Mount Point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304\u003cinline style=\"font-family: Arial;\"\u003e, stai\u003c\/inline\u003enless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 4.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 385mm - 409mm to BMW E9X and E82 Series floor\u003c\/inline\u003e\n\u003cdiv\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003eBecause of their different seat mount points, Sparco seats tend to sit high with the R-926X seat mounts while Recaro seats mount low. We recommend tall drivers use Recaro seats and short drivers use Sparco seats. Average height drivers should be fine with either. \u003cb\u003eSub Strap Mount Sold Separately.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe R-9262 fits seats between 385mm - 409mm wide at the side mount mounting point. This includes, but is not limited to:\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003c\/inline\u003e\u003c\/strong\u003e\u003c\/inline\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cinline style=\"font-family: Arial;\"\u003e\u003cinline style=\"font-family: Arial;\"\u003e-The R-926X line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your E9X BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e-The \u003c\/inline\u003e\u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e\u003cinline style=\"font-family: Arial;\"\u003e seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required.\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e \u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e-The \u003c\/inline\u003e\u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e\u003cinline style=\"font-family: Arial;\"\u003e seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e-Due to not using a floor mount adaptor or sliders, the \u003c\/inline\u003e\u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e\u003cinline style=\"font-family: Arial;\"\u003e seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e \u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e-The \u003c\/inline\u003e\u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e\u003cinline style=\"font-family: Arial;\"\u003e seat mounts weight 4.5 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e \u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e-The \u003c\/inline\u003e\u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e\u003cinline style=\"font-family: Arial;\"\u003e seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e\u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all \u003c\/inline\u003e\u003cspan style='color: rgb(0, 0, 0); font-family: \"Times New Roman\";'\u003eR-926X\u003c\/span\u003e\u003cinline style=\"font-family: Arial;\"\u003e seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our \u003c\/inline\u003eR-9520\u003cinline style=\"font-family: Arial;\"\u003e\/\u003c\/inline\u003eR-9530\u003cinline style=\"font-family: Arial;\"\u003e quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/inline\u003e\u003cinline style=\"font-family: Arial;\"\u003e \u003c\/inline\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-925X Series Side Mounts\u003cbr\u003eR-2295 Fire Extinguisher Mount for R-926X Series Side Mounts\u003c\/inline\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016419644,"sku":"R-9262","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9262-2_43952748-f16c-4fb7-97b7-51af0d1c615e.jpg?v=1784838424"},{"product_id":"brey-krause-r-9286-cobra-nogaro-seat-mounts-for-oem-sliders","title":"Brey Krause R-9286 Cobra Nogaro Seat Mounts for OEM Sliders","description":"\u003cspan id=\"product_description\"\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eMaterial:\u003c\/b\u003e 11 gauge, type 304, stainless steel\u003cbr\u003e\n\u003cb\u003eFinish: \u003c\/b\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 4 lbs\u003cbr\u003e\n\u003cb\u003eModels:\u003c\/b\u003e E90, E91, E92, E82, F80, F81, F82, F30, F31, F32\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eInstallation:\u003c\/b\u003e \u003cbr\u003e\n\u003cb\u003eMiscellaneous: \u003c\/b\u003eAttaches to the original BMW power or manual slider\r\nthat came with your car. \u003cb\u003e\u003ci\u003eBoth driver \u0026amp; passenger side seat\r\nmounts included.\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFeatures and Benefits:\u003c\/b\u003e\u003cbr\u003e\r\n- Works with the factory power and manual sliders\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003co:p\u003e \u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- Stock 3 point receiver attaches with no addition parts\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003co:p\u003e \u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- For power slider use, BMW PN 61311377905 (e30 window\r\nswitch) or aftermarket equivalent required to control slider. \u003cb\u003e(Required for\r\npowered installation)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003co:p\u003e \u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- Sub strap mount, if required: R-9259 (one per seat, MSRP\r\n$89.95)\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003co:p\u003e \u003c\/o:p\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e- Clip in lap belt mount points (for 4\/5\/6 point), if\r\nrequired: R-9288 (driver, MSRP $79.95) and R-9289 (passenger, MSRP: $79.95)—not\r\nneeded for Schroth Quickfit\u003cbr\u003e\u003cbr\u003e- R-9288 \u0026amp; R-9289 are required to install the OEM 3-point seat belt in car that have the outward seat belt strap mounted to the seat. \u003cbr\u003e\n\u003cbr\u003e\n\u003c!--[if !supportLineBreakNewLine]--\u003e\u003cbr\u003e\n\u003c!--[endif]--\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003e\nR-9258 Sub\r\nStrap Mount for R-928X Series Side Mounts\u003cbr\u003e\nR-9288 Passenger\r\nside clip\/bolt in 4\/5\/6 point lap belt mounts for E9X\/F8X factory sliders\u003cbr\u003e\nR-9289 Driver\r\nside clip\/bolt in 4\/5\/6 point lap belt mounts for E9X\/F8X factory sliders\u003cbr\u003e\nR-2295 Fire\r\nExtinguisher Mount for R-928X Side Mounts\u003cbr\u003e\nR-9520 Quick\r\nRelease Fire Bottle Mount (3\" dia. or 2.5lbs bottle)\u003cbr\u003e\nR-9530 Quick\r\nRelease Fire Bottle Mount (90mm dia. bottle)\u003c\/p\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016714556,"sku":"R-9286","price":421.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9286-2_084c5dec-735e-4277-a83d-ad096eac574d.jpg?v=1784838425"},{"product_id":"brey-krause-r-9283-for-seats-between-435mm-and-460mm-at-the-mount-point","title":"Brey Krause R-9283 for Seats between 435mm and 460mm at the Mount Point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 4.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 435mm to 460mm to BMW F8X and F22 Series floor\r\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe R-9283 fits seats between 435mm to 460mm wide at the side mount mounting point.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9258 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-928X Series Side Mounts\u003cbr\u003eR-2295\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFire Extinguisher Mount for \u003c\/span\u003eR-928X\u003cspan\u003e Series Side Mounts\u003c\/span\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016845628,"sku":"R-9283","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9283-2_92187264-fc8e-4b14-b377-7a49505c67bc.jpg?v=1784838426"},{"product_id":"brey-krause-r-9284-for-seats-between-410mm-and-434mm-at-the-mount-point","title":"Brey Krause R-9284 for Seats between 410mm and 434mm at the Mount Point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 4.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 410mm to 434mm to BMW F8X and F22 Series floor\r\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe R-9283 fits seats between 410mm to 434mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-928X Series Side Mounts\u003cbr\u003eR-2295\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFire Extinguisher Mount for \u003c\/span\u003eR-928X\u003cspan\u003e Series Side Mounts\u003c\/span\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016911164,"sku":"R-9284","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9284-2_e14eba20-891a-4f46-aba3-a131fd74fd9e.jpg?v=1784838427"},{"product_id":"brey-krause-r-9285-for-seats-between-385mm-and-409mm-at-the-mount-point","title":"Brey Krause R-9285 for Seats between 385mm and 409mm at the Mount Point","description":"\u003cspan id=\"product_description\"\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eMaterial:\u003c\/span\u003e   \t  11 gauge, type 304, stainless steel\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eFinish:   \t\u003c\/span\u003ePowder-coated in durable black wrinkle-finish\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWeight:\u003c\/span\u003e 4.5 lbs\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eModels:\u003c\/span\u003e Mounts seats with a width between 385mm to 409mm to BMW F8X and F22 Series floor\r\n\u003cdiv\u003e\n\u003cspan style=\"font-weight: bold;\"\u003eInstallation:\u003c\/span\u003e \u003cbr\u003e\u003cstrong\u003eMiscellaneous: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe R-9285 fits seats between 385mm to 409mm wide at the side mount mounting point. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures and Benefits:\u003cbr\u003e\u003cbr\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003c\/font\u003e\u003c\/strong\u003e\n\u003cp style=\"margin: 0in 0in 0pt;\"\u003e\n\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e line of seat mounts is the clean, simple, light weight, and strong way to attach your fixed back bucket seats directly to the floor of your BMW. Instead of using long slots and tons of holes to create a one size fits all generic solution, they are made specifically to fit in a small number of car chassis and work with a limit range of seat sizes to create a precise fit.\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts bolt directly to the floor using the stock BMW hardware. No floor mount adaptor or alteration to the car is required.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts provide all necessary mounting locations for the 3 point seatbelt. These mounting points can be used to mount lap belts for the 4, 5, or 6 points as well. Sub strap mounting is possible when using the R-9259 Sub Strap Mount (sold separately). This system allows for the use of the stock 3 point seat belt in conjunction with 4, 5, or 6 point harnesses. \u003cbr\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e-Due to not using a floor mount adaptor or sliders, the \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts allow your seat to be mounted lower than any other mounting solution we've seen.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts weight 6-7 lbs per seat. Traditional adaptor\/slider\/mount\/belt mount point solutions can often weigh in excess of 20 lbs per seat.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The rear seat mounting holes, which take the majority of the load in a crash, are not slotted, adding considerable strength. \u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-The \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mount line has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev.MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e\u003cbr\u003e-If a fire extinguisher mount is desired, all \u003c\/font\u003eR-928X\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e seat mounts include provision to attach the R-2295 fire extinguisher mount. This mount can be used with either our R-9520\/9530 quick release mount or the stock 3 lb Amerex bottle mount.  \u003c\/font\u003e\u003cfont color=\"#000000\" face=\"Times New Roman\" size=\"3\"\u003e \u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eRelated Parts:\u003c\/b\u003e\u003cbr\u003eR-9258 Sub Strap Mount for R-928X Series Side Mounts\u003cbr\u003eR-2295\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eFire Extinguisher Mount for \u003c\/span\u003eR-928X\u003cspan\u003e Series Side Mounts\u003c\/span\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/span\u003e","brand":"Brey Krause","offers":[{"title":"Default Title","offer_id":53855016976700,"sku":"R-9285","price":252.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/files\/R-9285-2_9d03c764-9cd6-416d-a04d-a1c87ffca86b.jpg?v=1784838428"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3070\/1372\/collections\/brey-krause-side-mounts-to-bmw-oem-e46-power-sliders.png?v=1769202072","url":"https:\/\/trucranemotorsports.com\/collections\/brey-krause.oembed?page=2","provider":"TruCrane Motorsports","version":"1.0","type":"link"}