Skip to product information
1 of 2

Active Autowerkes

Active Autowerke Performance Software BMW M3 E90/E92/E93 S65

Active Autowerke Performance Software BMW M3 E90/E92/E93 S65

Regular price $524.45 USD
Regular price $649.00 USD Sale price $524.45 USD
Sale Sold out
Shipping calculated at checkout.

Active Autowerke offers unparalleled performance software. Through careful remapping of the factory BMW DME tables, various elements such as ignition timing, fuel delivery, and part throttles are reworked to create performance gains.
From the factory. there is inherent situations of a rough, cold start idle that makes
for poor drivability. With the new Active Autowerke software, the camshaft vanos tables are also re-mapped to eliminate this rough idle scenario to a smoother, cold start idle.
The Active Autowerke upgraded software is designed to operate with gasoline that has an average octane rating with full emissions to create a clean burning combustion with good AFR's all within factory specifications.

Key Features:
15+ Horspower gains throughout RPM range
Higher torque over factory settings through RPM range
Recallibrated settings for a smoother and more responsive part throttle transition
Recallibrated settings for a smoother and more responsive power delivery
Ability to upgrade all ECU's
Modified Vanos camshaft remapping eliminating rough cold start enable
Raised RPM thresholds in specific gears
Free tech support and assistance
Local Installation available for many.

Performance Specs:
15 HP @ 8400 RPMS u00a0 : u00a0 Rear wheel HP measured on the dyno
11 Ft / LBs @ 6700 RPMs u00a0 : u00a0 Rear wheel FT/LBs measured on the dyno
Software Purchase Options

 

Software Purchase Options:

When you purchase software you have 3 options to acquire it.

1) Locate an Active Autowerke Flash station equipped dealer near you and have it installed there. Click here for Dealer List.

2) Purchase a Simon3 cable and install the software yourself. Very useful if additional software upgrades are needed in the future.

WARNING - when flashing your ECU, it is important that you connect a battery charger to your car in order to provide a stable voltage source regardless of your battery condition and you must remove any sleep options on your laptop.

3) Remove and mail Active Autowerke your ECU and we will install the software. Same day turnaround.

***Before your order ships you MUST sign and return the Off Road Use Only Waiver available HERE. Please email, fax or take a photo of the completed form. You can email it to your sales rep or to info@activeautowerke.com and you can fax it to us at (305) 253-8921***

View full details

BM3 Vehicle Compatibility and Unlock Status Check Procedure

Connect to your vehicle, (you need to get an OBD2 Ethernet cable and an MFI certified adapter cable if applicable or a WiFi adapter) start the OBD agent (you can get it here: https://www.bootmod3.net/downloads/ or our APP) and before you’re about to log in on https://www.bootmod3.net , click on the ‘check support' button on the right-hand side. If using our app, login, click on vehicle and you should have this information (if locked or unlocked) already displayed on that page.

Message written in bold letters under your software ID's will let you know if we have support for your engine type. It will also tell you if you need a bench unlock or not, and what type of an unlock is needed if you do need one.

If the message states that your DME requires a bench unlock before flash-tuning your vehicle, you will need to reach out to one of our authorized dealers and inquire about a bench unlock. The listing for all of our authorized dealers can be found in the link attached below.